1, the installation of the bearing
Whether the bearing is installed correctly affects accuracy, life and performance. Therefore, the design and assembly department should fully study the installation of the bearing. I hope to install according to the operating standards. The items of the job standard are usually as follows:
(1) cleaning the bearing and bearing related components;
(2) Check the size and finishing of the connected components;
(3) installation;
(4) Inspection after installing the bearing;
(5) Supply lubricant.
2, alignment, straightening
After the bearings have been installed, alignment may result in additional loads, friction and vibration of the bearings if not carefully aligned. These can accelerate fatigue and reduce bearing life and can damage the life of other machine parts. In addition, increased vibration and friction can greatly increase energy consumption and risk of premature failure.
3. Basic condition monitoring
During use, the basic external conditions of the bearing operation are often monitored, such as temperature, vibration and noise measurements. These regular inspections will identify potential problems early and will prevent unexpected machine stops, enabling production plans, increased plant productivity and efficiency.
For more information and purchase please visit: https://www.supplyforever.com
