Carpenter carving machine use process, there is some wear and tear. This is very normal, after all, mechanical equipment must have wear and tear in the process of processing. So how do we certify the wear and tear of some spare parts? How can we conclude that an accessory is not damaged by grinding? Those parts are only slightly worn and can be used continuously? In particular, the tool in the CNC engraving machine is the most severely worn in the equipment, so the discrimination of the engraving tool is very important. Here are some ways to judge the wear and tear of the knives and knives summarized by Jinan Shunhuan. You can refer to them.
1. The machining condition of the machine tool is used to judge the wear condition of the tool. If the machining parameters and the cutting amount are reasonable, the machine tool oscillation is very large during the process, and the “嗡嗡” is declared. At this moment, it can be judged that the tool has reached a sharp wear condition. Replace the tool with the demand.
2, whether the tool wears, the amount of wear, the most direct way to distinguish is to listen to the sound, if the cutting sound is very heavy, perhaps screaming sharp, clarify that the tool processing conditions are not normal, at this moment can be analyzed, if the tool itself is excluded Problem, tool clamping problem, knife parameter problem, at this moment should be able to determine that the tool is worn out, the need to pause processing, replace the tool.
Timely understanding of the wear condition of the knives and knives, and timely replacement of the rigorous tools, otherwise the rigorous influence on the enamel measurement can also be a hazard to the CNC embossing machine itself.
