Advertising engraving machine manufacturer parameters and instructions for use?

1. Advertising engraving machine manufacturer parameters: advertising engraving machine model, advertising engraving machine outer dimensions, processing size, advertising engraving machine guide rail, advertising engraving machine transmission form, advertising engraving machine table top structure, advertising engraving machine laser, advertising engraving machine laser head , advertising engraving machine drive motor, advertising engraving machine operating system.

2, advertising engraving machine instructions:

(1) Do not install this equipment during lightning or thunder. Do not install the power outlet in a damp place. Do not touch the uninsulated power cord.

(2) The operator must be in strict training and must pay attention to personal safety and machine safety, and operate the computer engraving machine strictly according to the operating procedures.

(3) The power supply voltage requirements are 210V-230V. If the power supply voltage is unstable or there is a high-powered electrical equipment around, please be sure to select the regulated power supply under the guidance of professional technicians.

(4) Engraving machine, the control cabinet must be grounded, and the data cable must not be plugged in.

(5) Operators should not wear gloves, it is best to wear protective goggles.

(6) The mechanical body is a part of the aviation aluminum casting of the steel structure gantry, which is relatively soft. When installing the screw (especially when installing the engraving motor), do not use too much force to prevent the wire from slipping.

(7) The tool must be installed and clamped to keep the tool sharp. The blunt knife will make the quality of the engraving so that the motor is overloaded.

(8) Do not put your fingers into the working range of the tool. Do not remove the engraving head and use it for other purposes. Materials containing stone white cotton are not processed.

(9) Do not exceed the machining range. When the machine is not working for a long time, the power must be cut off. When the machine is moving, it must be carried out by a professional.

(10) If the machine is abnormal, please refer to the troubleshooting chapter of the operation manual or contact the dealer to avoid any damage.