Cleaning of machine tool spindle bearings

When disassembling the machine spindle bearing for inspection, first record the appearance of the machine spindle bearing, confirm the residual amount of the lubricant, and then wash the bearing after sampling the lubricant for inspection. As a cleaning agent, gasoline and kerosene are commonly used.

The removed spindle bearings of the machine tool are cleaned and finely cleaned. In the container, the metal mesh bottom is placed first, so that the spindle bearings of the machine tool do not directly touch the dirt of the container. In the case of rough cleaning, if the bearing is rotated with dirt, it will damage the rolling surface of the spindle of the machine tool and should be noted. In the rough cleaning oil, use a brush to remove the grease and the adhesive. After it is almost clean, it is transferred to the fine wash.

Fine washing is to carefully clean the machine spindle bearings while rotating in the cleaning oil. In addition, the cleaning oil should always be kept clean.
For more products, please visit: http://www.supplyforever.com/